Power source HiFocus 100

. Optimum process execution by microprocessor control

. Monitoring of process sequence as torch cooling, ignition time,
  pilot arc time, short circuit time during torch ignition, power
  source and so on

. Display of operating conditions, with malfunction indication
  and display

. Extensive interface for adaptation to CNC-control

. Serial data transfer for PC diagnostic

. Stepless current setting for HiFocus-quality from
  20 – 100 A and FineFocus-quality from 40 – 130 A by
  switch-over pilot current

. Optimum piercing by stepless time delay for main arc and adjustable
. current rise within 4 steps

. Adjustable down-slope at corner, start and end signals from the
  guiding system

. Digital display of current and voltage

. Automatic display of pre-set cutting current

Plasma torch PerCut 100

. Plasma machine torch PerCut 100 with standard lengths 6 m,
  10 m and 15 m and new beam production system ensure a
  stable main arc

. Long life-time of consumables by water cooling

. Hose parcel extensions 10 m, 20 m, 30 m or 40 m and plasma
  ignition box ensure a cutting range up to 55 m

. Stepless gas control ensures optimum gas parameters for cutting

. Special torches (robot, short or/and inclined torches) are available

. for 3D-applications (i.e. pipe cutting from inside)


Technical data