High cutting performance:

· Plasma torch with FineFocus-System with Double-Straight-Effect
  ensures an up to eight times higher cutting speed compared with
  oxygen cutting (depending on material thickness)

· Safe pilot-arc ignition by high-voltage impulses.

· Running cutting start and running piercing possible,
  no reference point necessary!

· Automatic power increase of the pilot arc at workpiece contact.

· Soft start circuit at cutting start and piercing increases
  the life time of nozzles and cathodes.

· Excellent cutting quality.

· Small kerfes, low material loss, low pollution development.

Low operating costs with water-cooled plasma torches:

· Increasing of life time of consumables by direct and effective
  cooling  of plasma torches (Life time of nozzles and cathodes up to 6
  times higher ! ) and no wear of torch bodies

· Soft start circuit at cutting start and piercing increases the life time
  of nozzles and cathodes additionally.

· Reducing of air consumption by ca. 80 % compared with air-cooled
  plasma torches

High labour safety:

· High labour safety by shock-proof with safety shut-down at cutting
  with hand torch.

· Control of the plasma gas and the thermal load of the plasma
  cutting system.

Characteristics of CUTLINE 40W:

· 2 cutting current steps: 50 and 100 A

· Plasma hand torch with central connector (length 6 m)

· Integrated water cooling for high life-time of consumables
  with watching by flow indicator

· Oil and water separator as well as justification of plasma
  gas pressure by reducer/cleaner on rear wall

· Transportation also by crane (4 crane hooks) or fork lift possible.

Optional accessories:

· Plasma hand torch with central connector (10 m), other lengths
  on request

· Plasma tractor FE 1 for mechanised cutting of straight cuts 
  (track available) and circles

· Circle attachment with magnetic or suction holder

· Wheel guide (ensures constant distance between torch and work,
  also for save cutting of contours)

· Bevel cutting attachment for cutting of any bevel for welding
  seam preparation

· Distance cap for template cutting

· Distance bow and distance cap for constant distance between
  nozzle and work

· Plasma cutting and plasma gouging - two technologies with
  only one machine

· Plasma gouging for preparation of welding seams, crack and
  inclusion removal, cast iron cleaning, surface removal and more,
  with the plasma cutting system CUTLINE 40W.

· The Kjellberg plasma torch PHT-45 W/L with FineFocus-System
  can be reset from the version for plasma cutting to the
  application for plasma gouging and vice versa in a few seconds.

· There need to be replaced nozzle and protection cap only.

· With this concept a high availability of the system is guaranteed.

Compared to gouging with carbon electrodes, a host of
technological advantages result, i.e.:

· no heat effected zone of the material.

· no grinding.

· lower heat penetration and therefore lower warpage.

· good observation of the process performance.

· noise level and smoke accumulation reduction.

 Technische Daten:  

Mains voltage	(V)	3 x 400    50 Hz  1)
Fuse, slow	(A)	35
Connecting power	(kVA)	24
Protection class		IP 22
Insulation class		F
Open circuit voltage	(V)	275
Cutting current	(A)	50 / 100
Duty cycle (d.c.)	(%)	60
Thickness   - quality cut                                                   - maximum cut	(mm)	30 (material depending) 40 (material depending)
Plasma gas		Air, 0.5 MPa
Plasma gas consumption	l/min	25
Cooling		Water
Ignition		High voltage
Weight	(kg)	132
Dimensions                         L x B x H	(mm)	820 x 490 x 880

1)       on request 500 V 

·       EN 60974-1, VDE 0544, EN 50078, EN 50192, EN 50199, VBG 15 (UVV 26.0).

·       CE sign, manufactured according to DIN EN ISO 9001.

·       S sign, applicable to welding jobs at work places with increased
       electrical endangerment.

Kjellberg plasma solutions