Suitable for straight, profile, template and bevel cutting in all positions,
for piercing, for hole and slot cutting.

Characteristics of CUT i 30:

· Stepless adjustable cutting current for optimal cutting current
  adaptation to the cutting job
· Constant power output also in case of line variations
· Technique: Cutting with contact nozzle, with contact cap or
  distance holder
· Safe pilot-arc ignition by high-voltage impulses.
· Plasma torch PHT-30 G/L with central connector (length 6 m)
· Excellent cutting quality.
· Running cutting start and running piercing possible, no reference
  point necessary !
· Automatic power increase of the pilot arc at workpiece contact·
· Oil and water separator as well as justification of plasma
  gas pressure by reducer/cleaner  on rear wall
· Additionally furnished with mains extension cable for
  mains 1 x 230 V/16A (max. cutting   current 30 A) for
  universal use, especially favourable for construction sites)

  High labour safety:

· High labour safety by shock-proof with safety shut-down at cutting
  with hand torch.
· Control of the plasma gas and the thermal load of the plasma
  cutting system.

  Optional accessories:

  Circle attachment with magnetic or suction holder
  Wheel guide (ensures constant distance between torch and work,
  also for save cutting of contours)

 Technical data:

 

Mains voltage		3 x 400 V/50-60 Hz
Fuse, slow	(A)	16
Connecting power	(kVA)	10,4
Protection class		IP 23
Insulation class		F
Open circuit voltage	(V)	250
Cutting current	(A)	20 – 70
Cutting current range                  35 % d.c.                                                           60 % d.c.                                                         100 % d.c.	(A)	70 60 50
Thickness   - quality cut                           - maximum cut	(mm)	25 (material depending) 30 (material depending)
Plasma gas		Air, 0.45 MPa (4,5 bar)
Plasma gas consumption	l/min	130
Ignition		High voltage
Weight	(kg)	17
Dimensions                         L x B x H	(mm)	560 x 190 x 400

·       EN 60974-1, VDE 0544, EN 50078, EN 50192, EN 50199, VBG 15 (UVV 26.0).

·       CE sign, manufactured according to DIN EN ISO 9001.

·       S sign, applicable to welding jobs at work places with increased electrical endangerment